How do I know if my fence posts are rotted?

Push on each post and see if it moves. Then poke the base with a screwdriver. If it sinks in easily or the wood crumbles, the post is soft and needs replacing. Rot often starts underground, so a post that looks fine can be weak. A repair visit will check each one and mark the bad ones.

Why does my gate keep sagging?

Usually the gate is heavy and the post is moving in the soil. Worn hinges, a missing brace or a frame that was built too light add to it. A proper fix may mean a larger post set in concrete, a diagonal brace and heavier hinges. Adjusting a latch alone rarely solves it for long.

Can you add an automatic opener to my existing gate?

Often yes, if the gate is strong, straight and swings or slides freely. Weak or sagging gates should be repaired first, since an opener will wear out quickly on a gate that binds. We look at the gate, the power source and the layout, then advise on swing or slide types.

Will a gate opener work during a power outage?

Only if it has a battery backup or can be released by hand. Many openers have a manual release for outages, and battery kits are common. Since storms can knock power out for a while around Cypress, ask about both when you plan a gate opener.

Should I repair or replace an older fence?

If the posts are sound and only parts are worn, repair is cheaper. If many posts are rotted or the whole fence leans, replacement usually costs less over time than repeated patching. A written quote for both options lets you compare. We tell you plainly which makes more sense for your yard.

Call now (281) 555-0191

(281) 555-0191 Get my free fence quote

Leaning wood fence and sagging gate with a rotted post base

Repairs and gate automation

Fence repair in Cypress after storms, rot and shifting soil

Fix leaning sections, replace rotted posts and boards, rehang sagging gates and add an automatic opener.

Call for a free estimate Get my free fence quote

Storm damage and leaning fence repair
Post replacement and gate rehanging
Automatic gate openers and keypads

Can my Cypress fence be repaired instead of replaced?

Often it can, and a repair can save a lot of money. The test is simple. If the posts are sound and the rails are straight, damaged pickets, panels or rails can be swapped out. If the posts are rotted at the base, snapped or leaning because the soil moved, patching the boards only hides the problem and the fence will lean again.

A good repair visit starts with checking each post by pushing on it and probing the base for soft wood. Then you get a plain answer, section by section, on what to repair and what to replace. If most of the fence is tired, a full replacement may be fairer. See our wood fencing page or vinyl page if you decide to start over.

What are the most common fence problems after a storm?

Gulf storms and heavy rain show up weak spots quickly.

Leaning sections

Wet clay softens and wind pushes against solid panels. Posts set shallow, or with too little concrete, lean first.

Blown-off pickets and rails

Old nails and rusted fasteners let go. Replacing them with screws or ring-shank nails helps.

Rotted post bases

Moisture sits at ground level. Rot often hides below the surface, so it can look fine until a gust takes it down.

Fallen trees and limbs

Broken rails and bent posts often need whole panels rebuilt. If a neighbor's tree caused it, ask your insurer how claims work.

We cannot promise insurance outcomes, but we can document damage.

How does gate repair and automation work?

Most gate trouble starts with weight and soil. A heavy gate pulls on its post, the post tilts in soft clay, and the latch stops lining up. Fixing it means a stronger post, a diagonal brace or a steel frame, and better hinges, not just a tighter screw.

An automatic opener makes sense for a driveway gate you use daily. The main types are swing openers, sliding gate operators and underground units. Look at the power supply, since outages after storms are common here, and ask about battery backup. Safety sensors that stop the gate if something is in the way are important. Many owners add a keypad or remote for guests and deliveries.

Driveway gates may need HOA or city approval, so check before ordering. Gates crossing an easement or fire access route can be restricted.

Repair costs depend on the scope and the cause:

How many posts need work. Resetting or replacing posts is the biggest part of most repairs.
Material. Matching old wood, vinyl or metal can take time, and older products may be hard to find.
Access. Tight side yards, dense vines and fallen debris add labor.
Gate size and hardware. Large or heavy gates need stronger fittings.
Automation. Openers, sensors, power runs and batteries add cost.
Finish. Staining or sealing to match the rest of the fence is extra.

You get a written quote, and we tell you if replacement looks like the better value. For a full metal option, see aluminum and iron fencing.

How long do repairs take and when should I call?

Small repairs, such as a few pickets or a gate latch, can often be done in a single visit. Replacing posts takes longer because the concrete needs time to set before the panels go back on. Gate openers need power and sensors wired, which can take a day or more. We do not promise a date before we have seen the job.

Call when you notice a lean, a gate that drags, loose boards after wind, or soft wood at the base of a post. Small problems get worse with each rain and gust. After a major storm, take photos before cleanup, secure pets and keep people away from downed power lines. Start from the home page if you want to see everything we do.

What you can expect

1

Free written estimates

2

Local crews

3

Clear timelines

4

Cleanup included

How it works

Step 1: Tell us about the fence

Length, style and goals.
Step 2: Site visit and quote

We measure and put the price in writing.
Step 3: Installation

Posts set properly, gates hung true, site cleaned.

Request fence and gate repair

Tell us what you need and we call you back.

No obligation.

Step 1 of 3

Questions about fencing in Cypress

How do I know if my fence posts are rotted?: Push on each post and see if it moves. Then poke the base with a screwdriver. If it sinks in easily or the wood crumbles, the post is soft and needs replacing. Rot often starts underground, so a post that looks fine can be weak. A repair visit will check each one and mark the bad ones.
Why does my gate keep sagging?: Usually the gate is heavy and the post is moving in the soil. Worn hinges, a missing brace or a frame that was built too light add to it. A proper fix may mean a larger post set in concrete, a diagonal brace and heavier hinges. Adjusting a latch alone rarely solves it for long.
Can you add an automatic opener to my existing gate?: Often yes, if the gate is strong, straight and swings or slides freely. Weak or sagging gates should be repaired first, since an opener will wear out quickly on a gate that binds. We look at the gate, the power source and the layout, then advise on swing or slide types.
Will a gate opener work during a power outage?: Only if it has a battery backup or can be released by hand. Many openers have a manual release for outages, and battery kits are common. Since storms can knock power out for a while around Cypress, ask about both when you plan a gate opener.
Should I repair or replace an older fence?: If the posts are sound and only parts are worn, repair is cheaper. If many posts are rotted or the whole fence leans, replacement usually costs less over time than repeated patching. A written quote for both options lets you compare. We tell you plainly which makes more sense for your yard.

Ready when you are. Call now or request a quote online.